Material Safety Data Sheet
Notch in nut for SAE identification
unknown | es
Imagen
Dixon Distributor?
Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.
Atributos
| DE de Tubo |
3/4"
|
|---|---|
| Peso |
0.267 lb
|
| Break Quantity |
1
|
| Paquete Opcional/Cantidad por Caja |
1
|
| Material |
Latón
|
| Material de Componentes |
Tapa de latón
|
| Rosca Hembra |
UNF
|
| Rango de Temperatura |
-40°F to 150°F (-40°C to 65.6°C)
|
| Longitud |
2.54"
|
| DI de Manguera |
3/4"
|
| Hex |
1-1/4"
|
| Valor de Presión | |
| Tamaño de Rosca Hembra |
1-1/16"-14
|
Detalles
Features
Installation
- Trim hose end with a smooth square cut.
- Lubricate either Lok-On fitting, hose or both.
- Insert Lok-on fitting into hose until first barb is in the hose.
- Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from the end. Push with a steady force until the end of the hose is covered by the yellow plastic cap.
Note
No hose clamps or ferrules are needed
Safety Notes
- Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
- Lok-On fittings will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
Specifications
- Number of Barbs: 3
- Barb Length: 1.50"
WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Recursos
Material Safety Data Sheet
Imagen
Product Literature
Imagen
Product Literature
Catalog Page
Imagen
Learning Video
